detail product

FreeMax Twister 30W Kit

  • $47.69
  • Ex Tax: $47.69
  • Product Code: M00002723
  • Availability: In Stock

Available Options


Please note: Tank is 2ml capacity, as per TPD regulations.

The FreeMax Twister 30W kit serves as both an excellent starter kit and a more advanced device, with mouth to lung and direct to lung vaping capabilities and a simple twist-to-adjust wattage range.

Marvellous Flavours by a Simple Twist

The FreeMax Twister 30W kit has a sub-ohm Fireluke 22 Tank with a diameter of 22 millimetres and a 30W Twister VM mod. The Fireluke 22 Tank uses the FreeMax FM Coiltech 4.0, with a SS904L mesh and tea fibre cotton formula. The 0.5ohm mesh coil is for direct to lung vaping, and works best with high vg e-liquids. For mouth to lung vaping with 50/50 e-liquid, choose between either the 1.0ohm mesh coil or the 1.5ohm mesh coil. The top-fill design is child resistant and has a leak-proof mechanism for added safety and convenience.

The 30W Twister mod is an easy to use, pen shaped variable wattage mod, that can be adjusted from the bottom between 7.5W and 30W, with 2.5W intervals. The built-in battery has a large capacity of 1400 mAh and is compatible with 1.5A fast charging, only taking 80 minutes to full charge.

The FreeMax Twister chip has a range of protective measures, such as short-circuit protection and low-power protection. An LED light inside of the firing button indicates the various working conditions.

1400 mAh Internal Battery and 1.5A Fast Charging

The Twister 30W is powered by a 1400 mAh, built-in battery with 1.5A fast charging.


An overview of components of the FreeMax Twister 30W Kit.

Adjustable Wattage

The super easy, twist-style Twister battery ranges from 7.5 watts to 30 watts, with 2.5 watt intervals per click.

Top Fill Design

The child resistant top fill design is added to the tank for ease and convenience. To refill the FireLuke 22 tank, simply lift and slide the top cap to expose the filling hole.

Leak-Proof Mechanism

Innovative by design, the leak-proof mechanism of the Fireluke 22 tank supports replacing the coil, even with e-liquid in the tank. The e-liquid feeding holes automatically close when pulling out the coil, leaving no mess or spillages.

FM Coiltech 4.0

The FireLuke 22 tank supports the FreeMax Coiltech 4.0 with a SS904L mesh and tea fibre cotton formula. For direct to lung vaping with high vg e-liquids, use the 0.5ohm DTL mesh coil. For mouth to lung vaping with 50/50 e-liquid or nicotine salts, use either the 1.0ohm or 1.5ohm MTL mesh coil.

Multiple Mesh Coil Options

Coil StyleResistancePower RangeSuitable For
Single DTL Mesh0.5 ohms15 to 30 watts
Direct to lung vaping
50/50 e-liquid
Single MTL Mesh1.0 ohm10 to 15 watts
Mouth to lung vaping
Nicotine salts
50/50 e-liquid
Single MTL Mesh1.5 ohms8 to 12 watts
Mouth to lung vaping
Nicotine salts
50/50 e-liquid

Eight Safety Protections

Overload Protection | Short Circuit Protection | Low-Voltage Protection | Over-Discharge Protection
Over-Heat Protection | Overcharge Protection | Over-Time Protection | Open Circuit Protection


Size: 78.3 mm x 22 mm | Weight: 127 grams | Tank Capacity: 2ml TPD

Included in the Box

To avoid premature coil failure, be sure to follow our coil priming guide.

Depending on how many cigarettes you smoke, we recommend the following strength e-liquids with this kit:
1 to 5 Cigarettes a day - Choose 3mg of traditional nicotine
6 to 14 Cigarettes a day - Choose 6mg traditional nicotine or 10mg Nic Salt
15+ Cigarettes a day - Choose 12mg traditional nicotine or 20mg Nic Salt
Not sure what Nic Salts are? See our guide here

Write a review

Note: HTML is not translated!
    Bad           Good